Redmi 10c [Fog] Logo Hang Fix | Fastboot Mode Flashing | Just Connect Your Device to PC

FirmwareForest December 03, 2023

 

Click Here For More Info About Redmi 10c [Fog] Logo Hang Fix Official Specification

InfoDetails
Software NameRedmi 10c
Versionv2023
File SizeOnly 331 MB
Release Date03 December 2023
PasswordNO PASSWORD
File Hosted Bywww.FirmwareForest.Com
File Price100% Free File (NO PAID)
CompressZIP/Compress
Windows CompatibleWindows 7/8/8.1/10 32 & 64 bit
Upload SourceGoogle Drive/MEGA

    Features OF Redmi 10c [Fog] Logo Hang Fix

    Is your Redmi 10c stuck on the logo screen, refusing to boot up? Don't worry, we've got you covered. This guide will walk you through the steps to resolve the hang on logo issue using fastboot mode and a small file we've shared. Please note that in some cases, unlocking the bootloader may be necessary. The file provided allows you to flash or rewrite the boot partition, facilitating an easy repair process for your Redmi 10c. Follow these steps carefully, and make sure to use the recommended Mi Flash Tool for a seamless experience.

    Download Necessary Files

    Ensure you have the required files downloaded before proceeding. This includes the small file provided for fixing the hang on logo issue and the Mi Flash Tool. 

    Unlock Bootloader

    If your device's bootloader is locked, you may need to unlock it before proceeding with the fix. Follow the official Xiaomi bootloader unlocking procedure, which typically involves obtaining an unlock code and using Mi Unlock Tool.

    Boot into Fastboot Mode

    Power off your Redmi 10c completely. Press and hold the volume down button and the power button simultaneously until the fastboot logo appears on the screen.

    Connect Your Device to PC

    Connect your Redmi 10c to your PC using a USB cable while in fastboot mode.

    Use Mi Flash Tool

    Launch the Mi Flash Tool on your PC. Select the appropriate ROM folder and ensure that your device is recognized by the tool.

    Flash or Rewrite Boot Partition

    Locate the small file you downloaded for fixing the hang on logo issue. This file is designed to flash or rewrite the boot partition. Follow the on-screen instructions in Mi Flash Tool to initiate the process.

    Wait for Completion

    Allow the flashing process to complete. Do not disconnect your device during this time. Once finished, your Redmi 10c should automatically reboot.

    Verify Fix

    After the reboot, check if the hang on logo issue is resolved. Your Redmi 10c should now boot up without any problems.

    How To Use?

    1. First, you need to download the zip file from the below link
    2. Next, you can unzip all files at c: drive (important)
    3. Ensure you have disabled the antivirus before running the installation
    4. Next, open the folder and install the setup file with some basic instruction
    5. Run the "Redmi 10c [Fog] Logo Hang Fix"
    6. Next, you can install all drivers if you already installed skip this step
    7. Connect the phone and try to do any function
    8. Enjoy !!!
    Subscribe My Telegram Channel

    Download From Direct Server : MEGA | Google Drive

    README:

    Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32-bit and 64-bit).

    Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. Flashing any Firmware or recovery may brick the device.

    Credits: Redmi 10c [Fog] Logo Hang Fix is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.